WIKA TG53 Instructions Complémentaires page 4

1. Safety
Supplementary documentation:
▶
This additional information for hazardous areas applies in conjunction
with the operating instructions "Bimetal thermometers, process
EN
version, models TG53 and TG54" (article number 14203024).
1. Safety
DANGER!
Danger to life due to loss of explosion protection
Non-observance of these instructions and their contents may
result in the loss of explosion protection.
▶
▶
▶
1.1 Explanation of symbols
DANGER!
... indicates a potentially dangerous situation in the hazardous
area that can result in serious injury or death, if not avoided.
4
Observe the safety instructions in this chapter and further
explosion instructions in these operating instructions.
Follow the requirements of the ATEX directive.
Observe the information given in the applicable
type examination certificate and the relevant
regulations for installation and use in hazardous areas
(e.g. IEC 60079-11, IEC 60079-10 and IEC 60079-14).
WIKA additional information models TG53, TG54 (ATEX)