Car Charging; App; X-Boost - EcoFlow RIVER mini Mode D'emploi

3.6 Car Charging

This product can be charged by using a car charging port, which should be used after the car's ignition
is turned on to avoid start failure due to a lack of voltage in the car's battery. In addition, ensure that
the car charging port and the cigarette lighter of the car charging input line are in good contact.
Our company is not liable for damage due to the failure to comply with these specifications.
Car charging cable

3.7 APP

You can control and view the information and data of the product
through the EcoFlow app.
For information on how to download, connect and use the EcoFlow app,
please refer to the official EcoFlow WeChat account.

3.8 X-Boost

To prevent operational failure due to discharge overload protection, when the total output power
exceeds the rated output power, the X-Boost function will start automatically, so that the product can
supply power to high-power devices with the rated output power.
Please note the following when using the X-Boost function:
1. The X-Boost function is enabled for this product by default. This function can be enabled or disabled
by using the EcoFlow app.
2. The X-Boost function is unavailable under the following conditions: AC output is turned on while AC
charging (bypass mode) or the X-Boost mode is turned off.
3. The X-Boost function is suitable for heating and motor equipment, but not for all electrical
appliances. X-Boost is not suitable for certain electrical appliances equipped with voltage protection
(such as precision instruments). To verify whether the X-Boost function can be used for a device,
please refer to the actual test.
7