Battery And Charging; Safety Concerns - Blaupunkt CARL 280 Mode D'emploi

BATTERY AND CHARGING

The battery must be charged before it is used for the first time. Please use exclusively
the original charger designated by Blaupunkt for charging; otherwise it might
damage the battery, and may even lead to fire and other hazard. Warranty expires, if
a charger other than the designated is used.
• Check carefully whether the rated input voltage of the charger is consistent with
the voltage of the power grid.
• Connect first the output plug of the charger with the charging
jack (22) of the battery
charger to the AC power supply.
• Fully charge of an "empty" battery takes 3-4 hours, when the charge indicator
light on the charger turns from red to green, the battery has been fully charged.
• After charging, first pull out the AC power plug
then pull out the plug connected with the battery

SAFETY CONCERNS

• The battery should be charged in a spacious environment,
staying away from high temperature, high humidity and fire, because battery and
charger are electronic products, high temperature and humidity can corrode
electronic components. This can result in harmful gases and soot, and even a
possible explosion.
• The charging time is recommended not be longer than 6 hours. An excessive
charging time will lead to shortened life expectancy of the battery.
. Then connect the input plug of the
22
, and
.