Prior To First Use; Application - KLS Martin group Aquajet Mode D'emploi

Instructions for Use
Water jet cleaning gun Aquajet
4.2

Prior to First Use

•
Mount the bar with the various attachments in a quickly accessible location, e.g. on the sink wall.
•
Attach a hose coupling suitable for the faucet to be used on the open end of the pressure hose (hose
coupling not within scope of delivery, see section 4.1.2 "Combination Products and Accessories",
page 20.
4.3

Application

Danger of injury from contaminated water!
When the water jet cleaning gun Aquajet is being used, splash water may injure the eyes, and
contaminated water splashes can cause infections.
•
Take suitable safety precautions to protect the user from contaminated water: Protective goggles,
safety gloves, rubber apron, etc.
•
Insert the attachment suitable for cleaning the object into the holding tip:
– Carefully press the attachment with the two bolts into the provided groove on the front part of the
cleaning gun and simultaneously rotate it by a quarter of a turn to the left or right until the bolts
snap into place.
– To replace the attachment, carefully press and turn it back again, until it can be removed.
Danger of injury from detached attachment!
If the attachment has not correctly snapped into place, it can be blown out violently by the water pressure
and cause injuries.
•
Ensure that the attachment is securely in place before use.
This is the case when the mounted attachment cannot be rotated anymore without pressing it in.
• Hold the water jet cleaning gun Aquajet above the sink.
•
Open the faucet.
Revision 2 21