Publicité
Les langues disponibles
Les langues disponibles
NoticeEoh-4Trads-FRENESIT-MAJ092021.qxp_Mise en page 1 29/09/2021 16:52 Page 20
M A K I N G A C U P O F C O F F E E
The machine is only compatible with MALONGO 1,2,3 SPRESSO
1 - Fill the tank with fresh water (
2 - Plug in the power cable (
3 - The central light ( ) will display 3 colours (blue, white and red) one after the other,
and then go out. The machine is now on stand-by.
4 - Press coffee button ( ) or ( ) to start heating (both coffee buttons flash).
5 - When the machine reaches the required temperature, the two coffee buttons (
and (
4
) will stay ON steady, and the machine is ready to serve coffee.
6 - Open the coffee pod packaging, remove the lid, and take out the pod.
7 - Pull on the machine handle ( ) to maximum while lifting to reveal the pod slot.
8 - Insert the pod in the slot and check positioning (the pod must not protrude).
9 - Push the handle (
IMPORTANT: It is essential to fully close the handle in order to obtain a great cup of
coffee. This Eco-Responsible machine is not equipped with an automatic closing device
to reduce energy consumption, therefore the user must push lightly on the bent end
of the handle with the palm of their hand, to fully close the handle.
It is easy to know when the required position has been reached, the handle will resist closing
when approaching closure and then all resistance will disappear when the handle is in the
correct closed position.
19
).
6
).
13
2
3
4
1
1
) towards the control buttons until completely closed.
®
pods.
However, do not push hard on the very
end of the handle. Excessive pushing
forces can indeed be caused by a pod
remaining in the machine from a previous
cycle, or a full pod basket (empty the
pod basket on a regular basis to avoid
any damage to your new coffee pods
for this reason).
3
)
Publicité
