3. Attach the 3-axis adjustment unit to the wall mount.
•
Decide which position you want to use for installing the 3-axis adjustment unit.
Mount it at the
stamp when the image is less than 75 inches (diagonally), or at the
when the projected image is 75 inches or more (diagonally).
: Less than 75 inches
•
Tighten the M4 × 12 mm hexagon socket head cap bolts (×4) supplied to install the 3-axis
adjustment unit.
M4 × 12 mm hexagon
socket head cap bolts
Spring washer
Washer
Bolt installation positions
When the diagonal image is less than 75 inches
When the diagonal image is 75 inches or more
32
stamp
: 75 inches or more