Toshiba RBC-IR1-PE Mode D'emploi page 5

All manuals and user guides at all-guides.com
I R
NFRARED
N F
AMES AND UNCTIONS OF
1. Infrared signal emitter
Transmits a signal to the indoor unit.
2. ON/OFF Button
Push button to start operation.
(A receiving tone is heard).
Push button again to stop operation.
(A receiving tone is heard.)
If no receiving tone is heard from the indoor unit,
push the button again.
3. Mode select (MODE)
Push this button to set the operating mode of air
conditioner.
(A receiving tone is heard.)
4. Temperature Buttons (TEMP)
The set temperature is
increased to 30°C.
Up
The set temperature is
decreased to 17°C.
Down
(A receiving tone is heard.)
5. FAN
Push this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature. You
can also manually select the designed fan speed
from three settings. (A receiving tone is heard.)
GB
C
EMOTE ONTROLLER
C
ONTROLS
6. Auto Louver (CHR/KHR/PGR only)
Push this button to swing louver.
(A receiving tone is heard.)
Push this button again to stop louver swinging.
(A receiving tone is heard.)
7. SET
This function not used.
8. Off Timer Button
Push to allow the (OFF) time to be set.
9. On Timer Button
Push to allow the (ON) time to be set.
10. Time Adjust Dial
Turn dial to set the on and off times.
11. CNL Cancel Button
Push to cancel on/off timer.
(A tone is heard.)
12. RSV Reserve Button
Transmit times from remote to indoor unit.
Push to set timer setting.
(A tone is heard.)
13. Lock Button
Push to lock all settings. Push to unlock all
settings.
14. Cover Button
When cover is closed this button is pushed to
activate the buttons on the cover.
– 5 –