Thermador Masterpiece HMDW30WS Manuel D'instructions page 18

Recirculating Kit (optional)
When used in recirculation mode, To Reduce the Risk of
Fire and Shock use only conversion kit Model
and RECHMDW3 6 .
If it is not possible to vent cooking fumes and vapors to
the outside, the hood can be used in the non-vented
(recirculating) version, using the recirculating kit .
Fumes and vapors are recycled through the round grid.
See optional accessories section.
Installation through the sofit / cabinet
A
G
B
D
F
E
H
A. Ceiling
B. Recirculating grid
C.
Soffit
D. 6" (15.2 cm) vent
E. Range hood
sofit above.
sofit. Mark the location and use a saber saw or keyhole
RECHMDW3 0
G
I
F
F. Cabinet
G. Wall
H. 14" (35.5 cm) min. cabinet
height
I. Top of the cabinetry
A
B
A. Recirculating grid
B. Centerline
Charcoal Filter Replacement
(optional)
• The charcoal ilter cannot be cleaned. It must be
• The charcoal ilter is attached to the backside of the
grease ilter.
NOTE: DO NOT rinse, or put charcoal ilter in an automatic
Charcoal ilter installation
A
ting) version, using the charcoal ilter kit.
B
Fumes and vapors are recycled through the charcoal ilters.
Remove the grease ilters of the hood.
C
D
Evenly position the charcoal ilter to the backside of the
grease ilter.
E
the charcoal ilter to the metal ilter.
NOTE: The charcoal ilters cannot be cleaned. It should be