Wheel engage lever
1.
Accelerator hand lever
2.
Handles
3.
Fuel inlet
4.
Motor ignition
5.
Grass divider
6.
Central cutting blade
7.
Oil inlet
8.
9.
Wheel release lever
10. Blade engage-release lever
IDENTIFICATION AND TECHNICAL CHARACTERISTICS
•
Motor fuel: unleaded petrol
•
Complete with self-winding start-up device
•
Safety device on handles to stop machine
•
Dry air filter
•
Consumption at 3600 r.p.m.: 0.8 Kg/hour
•
MOTOR OIL: SAE 10W/30
•
Oil quantity in motor: 0.6 l
•
Gearbox: oil bath single gear
•
GEARBOX OIL: SAE 80W/90
•
Oil quantity in gearbox : 0.5 Kg.
•
Manually controlled wheel release and cutting bar
•
Steering handles mounted on vibration-damping supports
•
Rubber wheels 3.50.6
•
Central mowing unit with E.S.M. with 92 cm width
•
Clutch with belt tightening pulley.
•
For machine identification (serial number, motor, weight, power) refer to the data plate as shown in the photo. See Ref. "A
.
in Picture 2
7
LIST OF MACHINE PARTS:
- Picture 1-
Model: Solo 531
Weight: 57 Kg.
Motor: 4 strokes, petrol
Make: HONDA
Model: GCV 135
Swept volume: 135 cc.
Max. power to driving shaft at 3200
revolutions per minute (Kw 3,4)
-Picture 2-