How to Fill
CAUTION: Before filling unit with water, turn the power off and unplug the unit from the outlet.
NOTE: Always use two hands to carry the water tank.
Fig. 7
1. Grasp tank handle and lift up from humidifier base. (Fig. 3)
2. Turn the tank upside down-remove the tank cap by turning it
counter-clockwise. (Fig. 4)
3. Fill the water tank with clean, cool (not cold) water. We
recommend using distilled water if you live in a hard water area.
4. Replace the tank cap by turning clockwise until tight. (Fig. 6)
5. Install the tank back on the base of the unit. Make sure the tank
is firmly seated. (Fig. 7)
NOTE: It is normal to have a small amount of water
in the base during and after use.
7