Home Skinovations Silk'n FaceFX Mode D'emploi page 15

BATTERY –
CHARGING -
INDICATOR LIGHT
(K Orange) does
not turn on when
connecting the PLUG
into the BASE UNIT
SOCKET
APPLICATOR
temperature rises
during use
READY MODE
INDICATOR
I (Green) is blinking
READY/TREATMENT
MODE-INDICATOR
(I Green) does not
lit when pressing the
ON/OFF SWITCH
The Yellow SYSTEM
ERROR - INDICATOR
LIGHT (J Yellow) is
blinking
The Orange
BATTERY –
CHARGING and
Green BATTERY –
FULL - INDICATOR
LIGHTS are
illuminated
alternately
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
The ADAPTOR is Insert the PLUG into the BASE UNIT SOCKET
not plugged in the
electrical outlet
Connect another appliance to the wall
socket to check if the electrical outlet is live
If the APPLICATOR still does not charge,
contact your local Silk'n Customer Service
Center
The ADAPTOR Make sure the APPLICATOR is inserted
is not inserted properly into the electrical outlet and/or
properly into the PLUG is inserted properly into the BASE
electrical outlet and/ UNIT SOCKET
or the PLUG is not
inserted properly
into the BASE UNIT
SOCKET
The APPLICATOR is Contact your local Silk'n Customer Service
broken Center
This is normal No action is required
The rechargeable Charge the ADAPTOR
batteries are empty
Batteries are empty Charge the applicator
Batteries are full Press the ON/OFF SWITH twice to switch
(L Green) indicator the applicator off and on again. If READY/
lit when applicator TREATMENT MODE-INDICATOR (I Green)
is placed in base does not lit again, contact your local Silk'n
unit charger Customer Service Center
Malfunction of the Press the ON/OFF SWITCH twice to switch
APPLICATOR the Applicator off and on again. If SYSTEM
ERROR - INDICATOR LIGHT (J Yellow)
illuminates again, contact your local Silk'n
customer Service center
Malfunction of the Disconnect the ADAPTOR from the electrical
APPLICATOR outlet, press the ON/OFF SWITCH twice to
switch the APPLICATOR on and off again.
Connect the Adaptor to the wall socket,
If the problem persists, contact your local
Silk'n Customer Service Center
Malfunction of the Press the ON/OFF SWITCH twice to switch
APPLICATOR the Applicator off and on again. If the
problem persists, contact your local Silk'n
Customer Service Center
15