Publicité
Les langues disponibles
Les langues disponibles
EN
with carrier rack fastening system
Read the instructions and keep them for future reference.
Follow and comply with the safety precautions!
Make sure you know how to mount and use the Baby Shield child
seat before using it.
Product description
Baby Shield with carrier rack fastening system is a rear child bike
seat mounted on a rear carrier rack that is between 120mm and
175mm wide. Baby Shield is designed to carry children who are at
least about 9 months old, weighing minimum 15 kg, and up to a
maximum of 22kg. The child must be able to sit independently, at
least for the duration of the ride. Baby Shield can also be mounted
on pedelecs. It must not be mounted on any other two-wheeled
vehicles such as scooters, mopeds, motor-cycles, etc.
WARNING: for safety reasons this child seat must be mounted
on carrier racks with a minimum capacity of 25Kg conforming to
standard EN14872. Please check carrier rack characteristics before
mounting the seat.
Product overview
1
Seat
2
Padding (fixed with Velcro system)
3
Safety belts
4
Reflector
5
Left jaw
6
Right jaw
7
Fastening plate with safety belt
8
Hole plug
9
3 M6x30 screws
10
3 M6 self-locking nuts
11
3 6x18 washers
12
1 M4x12 screws
13
Handwheel
14
Footrests
15
Adjusting pin
16
Footrest straps
Important safety information
1)
The child seat must be mounted on the rack behind the rider,
6
Rear mounted child bike seat
OKBABY BABY SHIELD
Seggiolino posteriore Baby Shield
Publicité
