Automatic Transmission Switch Over - Ortovox ZOOM+ Mode D'emploi

INSTRUCTIONS
SIGNAL OVERLAP
The transmission signals are measured and analyzed by the ZOOM+.
If several transmission signals are received that are transmitting
at the same time then a signal overlap occurs.
8

AUTOMATIC TRANSMISSION SWITCH OVER

In the event of a
to which you fall victim (with your device
in search mode), the
switches to transmission mode after 2 min-
utes of non-movement. This is indicated by
a 10-second warning tone.
This makes it possible for you to also
be found if buried in an avalanche while
searching.
SECONDARY AVALANCHE
ZOOM+ automatically
The signals overlap and can no
longer be technically distinguished.
In the worst cases, this can last
for several seconds.
A signal overlap is illustrated
without a direction arrow e.g. "40"
and with the multiple signal
indicator (8) illuminated.
You must wait until the signal
overlap period has passed before
you continue your search.
120 Sec
ZOOM+
EN 41