English
3. C onnect the other end of the hoses to their respective washer inlet located at
the rear of the washer.
Note: H ot water needs to be at a temperature of at least 120ºF - 140ºF. (49ºC
- 60ºC) for the soap to dissolve and to avoid soap residue remaining on
clothes.
4. U sing the drain hose clamp. Attach the drain hose to the unit as shown below.
Install the drain hose hook to the outer drain hose tube.
5. Plug in the washer to a regular 120 volt ~ 60 Hz, 15 amp outlet.
8
Drain hose hook
Drain hose clamp
Drain hose joint