De Dietrich DPI7884XT Manuel D'utilisation page 73

2
•
USE
Warning:
- You can programme a time in sensor
mode. In this case, the time is displayed
alternately with the temperature.
- The sensor can only be used on one
burner at a time.
- At the end, do not forget to switch off
the sensor with a long press on the
sensor; the LED lights up in red for a
few seconds.
- The sensor turns off automatically 1
minute after the hob is turned off.
- To avoid damaging your sensor, do not
put the electronic box of the sensor
directly above the cooking fumes.
- The boiling temperature of water
may vary depending on the altitude
and atmospheric conditions of your
geographical situation.
- A loss of communication may be caused
by a weak battery.
Technical information regarding the
sensor:
Parameter Specifications
Voltage
Autonomy
LED colour White
Green
Blue
Red
Operating
temperature
Temperature
measurement
range
Working
frequency
Reach of the
sensor
Maximum
power
18
2.5 - 3V CR2032 battery
with new battery
300 hours
On
Awaiting connection
Connected
Off
Sensor's box
0 - 85°C
5° - 180°C
2402 - 2480
MHz
2 metres
< 10 mW
Notes