Perry Electric 1TPTE502B Mode D'emploi page 9

TECHNICAL DATA
Thermostat:
Supply voltage:
DATI TECNICI DATI TECNICI
Type of action, disconnect and device:
Type of output:
Output connection (load):
Inputs for "Reduction" control, remote:
Maximum wire section at terminals:
Insulation type:
Protection degree:
Pollution:
Operating temperature limits:
Storage temperature limits:
Temperature adjustment range:
Settable max. temperature limit:
Reduction temperature:
Precision of reading of the temperature:
Operation:
Differential operation:
Energy classification ERP
Thermal gradient:
Reference standard for CE mark:
External probe:
Protection category:
Dielectric strength:
Type of wire:
Maximum distance of the probe:
Operating temperature limits:
230 V~ 50 ÷ 60 Hz
1/ B / Electronic
Relay with changeover contact NO / COM / NC
voltage free - max 8(2)A / 250 V~
2 or 3 conductors
for voltage free contact
supply and relay contact = 2,5 mm
2
reduction remote = 1,5 mm
2
remote probe = 1,5 mm
Class II
I 30 P
Normal
0 °C ÷ + 50 °C
-10 °C ÷ + 65 °C
0 °C ÷ + 60 °C
28, 32, 36, 40, 44 °C (settable with range disc)
-9 °C from comfort temperature setpoint
± 1 °C
ON/OFF with differential
Dt = 0,4 °C (fixed)
ErP: Class I; 1% Reg. EU 811/2013
1 °K/15 min
LVD EN60730-2-9
EMC EN60730-2-9
IP 55
>3750 V~ for a minute
2
PVC, Bipolar (2 x 0,22 mm ) length 4 m
100 m (with minimum section of wire 0,5 mm )
-30 °C ÷ +85 °C
DIMENSIONS
T ermostat h
2
Remote probe
4 m
2
82
120
27,5
33,5
20 mm
Ø 4.8 mm
Nickel- plated copper capsule
EN
9