MasterCraft 068-7305-4 Mode D'emploi page 16

14
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-7305-4 | contact us 1-800-689-9928
3. Secure the sliders to the drawer
using four Screws (15) each and
tightening with Screwdriver (21). Place
the Drawer Mat (24) inside the drawer.
Repeat for all six drawers (Fig. S).
16. Install the Stainless Steel
Doors
Attach the Left Door (6) and the Right
Door (7) using five Screws (15) each
and tightening with Screwdriver (21)
(Fig. T).
Note: The screw holes on the door
hinge have tolerance, enabling the
door to be adjusted and centred in the
door frame (Fig. T).
17. Install the Middle Shelf (10)
Place the Middle Shelf (10) in the unit at
the desired height and ensure that all
four corners are secured on the hooks
on the front and back frame (Fig. U).
NOTE: This product provides
fingerprint-resistant surfaces and
increased durability.
Stainless Steel Maintenance:
A fingerprint-resistant finish has been
applied to these parts. Do not use traditional stainless steel cleaners on this unit.
Lightly wipe off once a month with clean warm water and a soft cloth (preferably a
microfibre cloth). This is the safest formula to prevent new stains from appearing
over time and manage unwanted fingerprints or grease marks. Remember to always
wipe in the direction of the surface grain (NEVER ACROSS) and always use a lint-free
cloth. Once the surface is clean, thoroughly wipe dry with a soft absorbent cloth.
headline bars headline bars headline bars headline bars
Fig. S
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes notes notes
Fig. T
warnings warnings warnings warnings
Fig. U