MasterCraft 068-7305-4 Mode D'emploi page 15

3. Slide the sides of the drawers into
the gap in the Small-size Drawer
Front (11-1) and secure with five
Screws (15) using Screwdriver (21) to
tighten (Fig. P).
15. Place the Drawers
1. Pull out the sliders completely (Fig.
Q).
Note: Please remove the hook's
rubber protectors before you assem-
ble drawers onto slides.
2. Place the drawers on the sliders,
making sure the square holes on the
drawer side panels are lined up and
the drawer is completely hooked onto
the sliders (Fig. R).
Fig. P
Fig. Q
Fig. R
13