MasterCraft 068-7305-4 Mode D'emploi page 10

8
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-7305-4 | contact us 1-800-689-9928
ASSEMBLY PREPARATION
• Assemble the storage cabinet on a clean, level surface.
• Remove all items from the packaging box and ensure that all parts listed on page
5 – 7 are included.
• When installing parts that have more than one screw, tighten all screws by hand
before tightening them with the screwdriver provided.
ASSEMBLY INSTRUCTIONS
1. Unpack
Open both inner boxes. Please note
the Solid Hardwood Top (8) is packed
inside one cardboard box (Fig. A).
2. Install Back Frame (4) to Solid
Hardwood Top (8)
[Use the Wrench (25) for this step.]
When assembling this item, place the
Solid Hardwood Top (8) upside down
on the cardboard to avoid scratching
the top surface (Fig. A). Using three
Screws (40) with three Washers
(27-B), attach the "Top" of the Back
Frame (4), indicated by the attached
sticker, to the Solid Hardwood Top (8).
Make sure the Back Frame is flush
with the Solid Hardwood Top, and do
not move frontward or backward
when tightening (Fig. B).
3. Install the Left Side Panel (1)
Align Left Side Panel (1) with the
Back Frame (4), making sure the
indicated "Top" of Left Side Panel (1)
is on the Solid Hardwood Top (8), and
attach with three Screws (15) using
Screwdriver (21) to tighten (Fig. C).
headline bars headline bars headline bars headline bars
continuation tabs continuation tabs
continuation tabs continuation tabs
Fig. A
notes notes notes notes
Fig. B
warnings warnings
warnings warnings
Fig. C