MasterCraft 068-7305-4 Mode D'emploi page 12

10
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-7305-4 | contact us 1-800-689-9928
7. Install Drawer Slider Support
(14)
As shown in the picture, pull out the
slider until the screw hole is visible.
Attach the Right Side Panel (2) and
the Drawer Slider Support (14) onto
the Front Frame (3) with three Screws
(15) using Screwdriver (21) to tighten
(Fig. G).
8. Install Base Panel (5)
Attach the Base Panel (5) to the Left
and Right Side Panels (1 and 2) and
the Front and Back Frames (3 and 4)
with 14 Screws (15) using Screw-
driver (21) (Fig. H).
9. Install Wheels (12-B and 13-B)
Place Fixed Wheels w/o Brakes (13-B)
on the same end (right or left side) of
the cabinet and the Swivel Wheels
with Brakes (12-B) on the other end.
Secure wheels with 16 Screws (17)
using Screwdriver (21) to tighten (Fig.
I).
Note: There is some tolerance in the
wheel screw holes, so make sure that
the two Fixed Wheels w/o Brakes
(13-B) are parallel both to each other
and with the frame of the cabinet.
headline bars headline bars headline bars headline bars
Fig. G
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes
notes notes
Fig. H
warnings warnings
warnings warnings
Fig. I