Télécharger Imprimer la page

La Crosse Technology WS8007 Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Part A:
A1: Radio Controlled Icon
A2: Time Display
A3: Temperature
Part B:
B1: "MODE" button
B2: "SNOOZE" button
B3: "ALARM" button
Part C:
C1: Wall Mount Hole
C2: Battery Compartment
3. Getting Started:
3.1 Main Unit:
Slide open battery compartment cover [C2]
Insert 4 x AA size batteries observing polarity *"+" and" –" marks+.
Replace battery compartment cover [C2]
Use a pin to press the RESET [B6] button on the rear of unit, the unit is now
ready for use.
4. Time and Alarm Setting
4.1 Radio Controlled Clock:
After batteries inserted, the clock automatically starts to scan the DCF time signal.
Radio Control Icon"
flashes,
Indicating now is receiving
DCF signal
The clock automatically scans the time signal at 3.00 a.m. every day to maintain
accurate timing. If reception fail, scanning stops ("
repeats again at 4.00 a.m. 5.00a.m. and6.00a.m.
The clock can be set to scan the time signal manually by holding "
for 3 seconds. Each reception takes about 5 minutes. If receptions fail, scanning
A4: Date, Day of Week
A5: Indoor Humidity
B4: "+/12/24" button
B5: "-/C/F/ " button
B6: "RESET" button
C3: Stand
" flashes on the LCD.
turns on,
Indicating signal received
successfully
English - 2
disappear,
Indicating signal reception
failed
" on LCD disappear) and
" button (B5)

Publicité

loading