La Crosse Technology WS8007 Mode D'emploi page 10

Press " MODE" button (B1) to select to view alarm Time, "AL" shown on the

display
When viewing the Alarm Time, hold "MODE" button (B1) for 3 seconds to enter

Alarm Time setting. Press "+" (B4) or "-" (B5) button to adjust the alarm time.
Press "MODE" button (B1) to confirm the setting.
4.4 Snooze Alarm Function:
Press "ALARM" Button (B3) to activate or deactivate the alarm. If the alarm is on,

alarm icon " " appears on the display.
Press "SNOOZE" (B2) button when alarm alerts. The alarm snoozes for 5 minutes,

then it alerts again. "
can be repeated 7 times.
Except "SNOOZE" button, press any button to stop the alarm, or press "ALARM"

(B3) to stop snooze alarm.
4.5 12/24 Hour Display mode:
Press "12/24" (B4) button to select 12 or 24 hours mode.

5. Thermometer
Press "°C/°F" (B5) button to select Temperature in Celsius mode/ Fahrenheit

mode.
If the temperature is out of the measurable range, LL.L ( beyond the minimum

temperature) or HH.H (beyond the maximum temperature) will be shown on the
LCD.
6. Precautions
The clock loses its time information when the battery is removed.

Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas

Never clean the device using abrasive or corrosive materials or products. Abrasive

cleaning agents may scratch plastic parts and corrode electronic circuits
7. Specifications
Unit Dimensions:
Battery Requirements:
Temperature Range:
Humidity Range:
" flashes on the LCD during the snooze time. This process
W368x h229 x d29mm
4x AA size batteries
0°C to 50°C
20% to 99%
English - 4