Wacom STU-300 Manuel De L'utilisateur page 6

Handling
WARNING
High Voltage. Do not open or disassemble the STU-300 LCD signature tablet.
There is a risk of electrical shock when the casing is open. This will also void your
warranty and Wacom shall have no responsibility to repair or replace the product.
If the LCD screen has been damaged, DO NOT touch any liquid that may be
leaking from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth,
rinse immediately with running water for at least 15 minutes or more. If contact is
made with the eyes or mouth, also consult a physician.
Prevent children from swallowing the pen tip. The pen tip may accidentally be
pulled out if children are biting on them.
CAUTION
Do not disassemble the pen. This may cause the device to malfunction. In this
case, Wacom shall have no responsibility to repair or replace the product.
Do not scratch the display screen. Avoid placing sharp objects on the display
screen surface.
Avoid intensive shock or vibration to the STU-300 or the pen. Hitting or dropping
the LCD signature tablet may damage the display screen or other components.
Do not put heavy articles on the LCD signature tablet or push against it with a
strong force; This may damage the display screen.
Do not place heavy articles on the STU-300 cabling, repeatedly bend the cables
sharply, or apply heavy stress to the cable connectors; this may damage the unit
or cabling.
If the pen tip becomes sharp or angular, it may damage the coating on the
display screen. Please replace the pen tip if necessary.
Do not use any organic solvent (e.g., alcohol) or even mild detergent to clean
the display screen. Use of these cleaners can damage the coating on the
screen.
Please note that damage of this kind is not covered by the manufacturer's
warranty.
• To clean the display screen, use an anti-static cloth or a slightly damp cloth. When
cleaning, apply only a light amount of pressure to the display screen and do not
make the surface wet.
• To clean the LCD signature tablet casing or pen, use a soft cloth with mild detergent
(such as dish washing liquid) diluted with water.
Do not expose the STU-300 to high voltage electrostatic discharges or to a
build-up of an electrostatic charge on the LCD screen. This may result in a
temporary blotching of the LCD monitor. If blotching occurs, leave the STU-300's
display on and the blotching should disappear within a few hours.
Wacom LCD signature tablet products comply with the European Union RoHS
Directive 2002/95/EC (RoHS Directive).
4
SignPad.indb 4 SignPad.indb 4 2009/11/12 10:32:43 2009/11/12 10:32:43