Ribimex Ribitech PRTIRF2T Manuel D'instructions Et D'utilisation page 16

VI. MAINTENANCE AND STORAGE
6.1- Hand puller maintenance
1. Follow the instructions for lubricating periodically
Lubricate the cable and hook regularly with slight grease.
Grease the gears every 6 months. Use any good quality waterproof grease.
2. Inspect periodically all parts, steel cable, accessories and replace them if damaged or used.
3. Have damaged parts replaced by an authorized service center.
4. Check the nuts periodically and tighten them if they are loose.
6.2- Storage
- Keep product, instructions manual and accessories in its original packaging.
- Product must be stored in a dry location. Always lock up product and keep out of reach of children
6.3- Disposal
- Do not dispose with household garbage. Do not throw into the environment.
- Dispose of the product in a collection centre or a waste drop-off centre; or seek advice from your
local municipality.
- Proceed with disposal of, the tool, accessories and packaging according to local regulations
regarding the protection of the environment
Page 16 of 23