Elevating Leg Rest; Flip Down Footrest - broda Midline Mode D'emploi

3.4

Elevating Leg Rest

Gas cylinders allow the leg rest to be positioned
infinitely from horizontal to vertical. The leg rest
elevates with the recline. It is also independently
adjustable.
To Adjust the Leg Rest:
-Hold the leg rest to assist movement and squeeze the
leg rest handle.
-Raise or lower the leg rest to the desired angle.
The leg rest elevates with the back recline but not with
the seat tilt. If the back is in the recline position, the
leg rest cannot be lowered independently.
3.5

Flip Down Footrest

The flip down footrest is removable and length
adjustable.
To Attach the Footrest:
-Insert the right end of the footrest upper cross piece into
the desired hole in the right side of the leg rest frame.
-Insert the left end of the footrest upper cross piece into
the corresponding hole in the left side of the leg rest
frame.
-Release the tension on the spring mechanism.
To Remove the Footrest:
-Lift up the footrest slightly to discontinue contact
between the straps on the footrest and the leg rest.
-Squeeze the footrest to the right to activate the spring
mechanism, and release the left and right side.
12
1
Length
Adjustment
Increments