Performance/Safety Features - Kenmore Intuition BU4050 Manuel D'entretien Et D'utilisation

ATTACHMENT
DELUXE DUSTING BRUSH
UPHOLSTERY TOOL
CREVICE TOOL
PET HANDIMATE ®
*Always clean attachments before using on fabrics.
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction motor.
If a clog prevents the normal flow of air to
the motor, the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.
To reset thermal protector: Turn the
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal protectors
to reset.
CAUTION
Always return the vacuum cleaner to
the upright position before using the
hose and attachments. Failure to do
so may result in overheating of the
brushroll motor and can cause the
thermal protectors to trip.
ATTACHMENT USE TABLE
Furniture*

PERFORMANCE/SAFETY FEATURES

CLEANING AREA
Between
Drapes*
Cushions*
Check for and remove clogs, and replace
dust bag if necessary. Also check
and clean any clogged filters. Wait
approximately 50 minutes before restarting
vacuum cleaner.
BY-PASS VALVE
This vacuum cleaner has a By-Pass Valve
which prevents motor overheating and
damage. The valve opens to provide
cooling air when a clog prevents normal
air flow to the vacuum cleaner suction
motor. You will notice a change of sound
as air rushes through the valve opening.
To correct the problem: remove any clogs,
check and replace filters if needed, check
and install new dust bag if needed.
NOTE:
The By-Pass Valve may open
when using attachments or when cleaning
new carpet due to reduced airflow or air
path is blocked, caused by the attachments
themselves or by new carpet lint filling the
dust bag quickly.
- 16 -
= Applicable
Stairs Baseboards
Carpet Bare