Greencut EBW700 Manuel D'utilisation page 68

68
Si usted tiene problemas al fumigar con polvo:
PROBLEM
Dust does not come
out or comes out
intermittently
Dust escapes from the
tank
Dust flow cannot be
regulated
If you have trouble spraying with liquid:
PROBLEM
Product does not come
out or comes out
intermittently
Liquid leakage
NOTE: If you are unable to resolve the problem, please contact the Official Technical Service.
POSSIBLE CAUSE
Dust regulator is out of adjustment
Tank lid not properly installed and closed
The product to be fumigated is not dust or
foreign objects.
There are lumps in the dust
Dust deposit is loose
Tank lid gasket is broken
Control of clogged dust
POSSIBLE CAUSE
The nozzle is clogged
Transparent tube is clogged
The stopcock is closed
The fuel filler flap is incorrectly mounted
The lid gasket is defective
SOLUTION
Send your machine to technical service
Insert the cover correctly
Change fumigation product
Breaking up dust lumps
Tighten the tank nuts
Replace gasket
Send your machine to technical service
SOLUTION
Clean nozzle
Clean the tube
Open the stopcock
Mount the cover correctly
Changing the gasket