Engine Shutdown - Greencut EBW700 Manuel D'utilisation

4. Pull the starter cord until the engine explodes or starts.
5. Place the air lever in the normal working position (OPEN).
1
4
NOTE: If the machine has not started (you have only heard an explosion) pull the starter cord again
until it starts or let the engine warm up for a few minutes before starting the machine.
HOT ENGINE START
• Place the machine on a flat, stable surface to start it. Never attempt to start the machine when it is on your back.
• Place the fuel tap in the open position.
• Place the throttle lever in the intermediate position.
• Place the air lever in the normal working position (OPEN).
• Pull the starter cord until the engine starts.
• If after a few attempts the machine does not start, follow the starting steps with the engine cold.

ENGINE SHUTDOWN

• Stop accelerating and let the engine idle for a few seconds.
1. Turn off the engine by moving the throttle lever to the lower position.
2. Turn off the fuel tap.
1
2
5
2
3
63
EN