Features & Functions - Paradigm PREMIUM WIRELESS Serie Manuel Du Propriétaire

FEATURES & FUNCTIONS
Power Button ( ):
• Press to power on/off. If no signal is
received for 20 minutes, unit will be in
standby.
• Press to reboot (power cycle) or
Factory Reset your Paradigm PW LINK
(see page 11).
Volume Up/Down Buttons ( / ):
• Press to increase the volume level.
Press to decrease the volume level.
• Press and hold either /
volume level up or down.
Mute Button ( ):
• Press to mute the audio. The Mute
button ( ) will illuminate WHITE when
the mute function is active.
• The Mute Button ( ) also switches on/
off ARC Settings
™
– To setup ARC and to learn how it
™
corrects room deficiencies see page 10.
– To switch off ARC settings: PRESS
™
and HOLD for 5 seconds. Upon
releasing the button, a "negative tone"
will sound verifying ARC
switched off.
6
– Repeat the process to switch on ARC
settings. You will hear a "positive tone"
when ARC
Input Button (
• PRESS and RELEASE
between Wireless/Wired Network
Streaming Mode AND Rear Input Mode.
• The Input button (
when Wireless/Wired Network Streaming
Mode is enabled and BLUE when the
Rear Input Mode is enabled.
to ramp the
• Your Paradigm PW LINK has the
following rear inputs: RCA analog inputs,
digital optical input, and Ethernet 10/100.
• Wireless/Wired Network Streaming
Mode is the default input mode. If your
Paradigm PW LINK is set to Rear Input
Mode and music is streamed, by default
your Paradigm PW LINK will switch to
Wireless/Wired Network Streaming Mode.
• Enable/disable Auto Input Mode
(see page 11).
Wi-Fi Setup Button:
• Initiates Wi-Fi setup for both Wi-Fi
Protected Setup (WPS)
settings are
™
and Standard Wi-Fi Setup.
™
settings are switched on.
™
):
to toggle
) illuminates WHITE
Wi-Fi Indicator ( ):
The Wi-Fi Indicator ( ) tells you what your
Paradigm PW LINK is doing:
• Fast Blinking – Your Paradigm
product is booting up.
• Blinking – Your Paradigm PW LINK
is attempting to connect to a wireless
router.
• Slow Pulse – Setup Mode.
• Two Blinks > Pause – WPS Mode.
• Solid – Connected to router.
• Off – Connected to a router
using a wired connection.