Connecting Pw Link - Paradigm PREMIUM WIRELESS Serie Manuel Du Propriétaire

CONNECTING PW LINK

1. There are four AC wall plug adaptors included with the PW LINK;
assemble the AC power adapter using the correct AC wall plug
adaptor for your country (see page 4).
2. Connect the AC Power Adapter cable to the input labeled
"DC In" on the rear of the PW LINK; connect the opposite end
of the cable to an AC wall outlet.
3. Choose your connection to connect to an existing preamplifier,
receiver or amplifier:
RCA Cable Connection: Connect RCA cables (not supplied)
to the left and right "Analog Out" jacks on the back of the
PW LINK. Connect the opposite end of your RCA cables to
the RCA Input jacks on your existing preamplifier, receiver
or amplifier inputs.
Digital Cable Connection: Connect a Digital Optical cable
(not supplied) to the "Digital Out" jack on the back of the
PW LINK. Connect the opposite end of the Digital Optical Cable
to a Digital Optical Input jack on your existing preamplifier,
receiver or amplifier inputs.
8
4. Choose your connection for connecting to a CD player, Turntable, etc.:
RCA Cable Connection: Connect RCA cables (not supplied) to
the left and right "Analog In" jacks on the back of the PW LINK.
Connect the opposite end of your RCA cables to the RCA Output
jacks on a CD player, turntable, etc.
Digital Cable Connection: Connect a Digital Optical cable
(not supplied) to the "Digital In" on the back of the PW LINK.
Connect the opposite end of the Digital Optical cable to a
Digital Optical Output jack on a CD player, turntable, etc.
5. If your amplifier has a Trigger Input, you can connect it to the
Trigger Output on your PW LINK with a 3.5 mm Mono Male-to-
Male cable. The Trigger Output can be used to power on your
preamplifier.