Updates; Reboot (Power Cycle) & Factory Reset; Enable/Disable Auto Input Mode - Paradigm PREMIUM WIRELESS Serie Manuel Du Propriétaire

UPDATES

DTS Play-Fi App Update:
®
If the DTS Play-Fi app on your device requires an update, the app
®
will notify you that an update is available and guide you through
the update process.
REBOOT (POWER CYCLE) &
FACTORY RESET
Reboot (Power Cycle):
PRESS and HOLD the Power button ( ) for 3 seconds. The Mute
button ( ) will start blinking once a refresh has been achieved;
upon releasing the button a tone will verify a refresh.
ENABLE/DISABLE AUTO
INPUT MODE
The Paradigm PW LINK can be configured to automatically select
the AUX input when the DTS Play-Fi
can be useful when using the PW LINK to improve TV audio, for
app is turned off. This mode
®
Paradigm PW LINK Owner's Manual
Paradigm Firmware Update:
At Paradigm we constantly strive to improve the performance
and functionality of your system, as a result from time to time
your Paradigm PW LINK will require firmware updates. Please
regularly check our website at www.paradigm.com for the latest
firmware updates.
Factory Reset:
PRESS and HOLD the Power button ( ) for 10 seconds (at 3 seconds
the Mute button ( ) will start blinking); once you hear a tone (at 10
seconds) to verify a reset, immediately release the reset button.
example, through the AUX input when wireless music streaming
is not in use. To enable auto input mode, hold the input button for
five seconds. Hold it again for five seconds again to cancel.
11