Westinghouse WPX2700H Mode D'emploi page 8

FEATURES
1 Spray Gun: Controls the application of water
onto the surface with trigger. Includes trigger
lock.
Gun Lance: Connects to end of spray gun and
2
works with pressure nozzles included.
3
Thermal Relief Valve: When water reaches
125 F warm water will discharge from pump onto
o
ground. Helps to prevent internal pump damage.
4
Recoil Starter: Pull to start engine.
5
Oil Fill/Drain Plug: Access to oil. Includes
dipstick to measure oil levels.
6
Air Filter: Filters dust and debris out of the air
intake to protect the engine.
7
Pump: Generates high pressure.
8
Unloader Valve: Controls pressure output.
9
High Pressure Outlet: Connection for high pressure
hose.
10
Water Inlet: Connection for garden hose.
6
14
13
2
8 | Westinghouse Outdoor Power Equipment
15
20
11
4
11 Fuel Tank: Fill with regular unleaded fuel. Do not overfill.
12 High Pressure hose: Connect one end to spray
gun and the other end to the water pump on bottom
of pressure washer.
Fuel On/Off Switch: Turns fuel supply to the engine
13
on and off.
Choke: Prepares a cold engine for starting.
14
Nozzles: Varying sizes for various high pressure
15
cleaning applications.
Chemical/Soap Tank: Siphons detergent into the
16
low pressure stream. Automatically turns on when
using black soap nozzle. Only use pressure washer
safe detergent.
17 Oil Drain Plug: Used to drain engine oil.
18 Engine On/Off Switch: Turn this switch "ON"
before using the recoil starter. Turn to "OFF" to stop
the engine.
Chemical/Soap Tube Connections: Connect
19
chemical/soap clear tube to tank and pump.
20 Nozzle Cleaning Tool: Used to clean nozzles.
18
5
17
16
3
Pump
1
12
7
19
8
9
10