Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
STOPPING THE PRESSURE WASHER
Normal Operation
During normal operation, use the following steps to
stop your pressure washer:
1. Lock the spray gun trigger lock in the OFF position.
2. Move the engine OFF/ON switch to the OFF
position.
3. Close the fuel shutoff valve.
4. Turn the water supply off.
5. Unlock the spray gun trigger and squeeze the
trigger to release any pressure in the hoses and
pump.
6. Disconnect the garden hose from the water inlet.
7. Complete all steps in After Each Use in
Maintenance section of manual.
During an Emergency
If there is an emergency and the pressure washer must
be stopped quickly, push the engine control switch to
OFF position immediately.
SELECTING NOZZLES
The quick-connect feature allows changing between
nozzles while the pressure washer is running once the
spray gun trigger is locked in the safe position.
Only use the nozzles that were supplied with the
pressure washers. Using any other nozzles can
affect performance and may void the warranty.
For replacement nozzles call (855) 944-3571.
Always apply the trigger lock to change a
nozzle if the engine is running.
14 | Westinghouse Outdoor Power Equipment
NOTICE
WARNING
High Pressure 0° (RED)
1
High to Medium Pressure 15° (YELLOW)
2
Medium Pressure 25° (GREEN)
3
Low Pressure 40° (WHITE)
4
Soap (BLACK)
5
Publicité
Table des Matières
