Grandstream GXP1160 Guide D'installation Rapide page 4

PHONE SETUP:
Installing the phone stand:
1. Attach the phone stand to the back of the phone where there is slot for the
phone stand;
2. Pull out the tab from the handset cradle (see figure below);
3. Rotate the tab and plug it back into the slot with the extension up to hold the
handset.
3
Install the phone
stand to the slot on
the back.
Handset Rest
Tab with extension up
Tab with extension down
CONNECTING THE PHONE:
PC Port
LAN Port
Power Port
To setup the GXP1160/GXP1165, follow the steps below:
1. Connect the handset and main phone case with the phone cord;
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable;
3. Connect the 5V DC output plug to the power jack on the phone; plug the power
adapter into an electrical outlet. If a PoE switch is used for GXP1165 in step 2,
step 3 could be skipped;
4. The LCD will display provisioning or firmware upgrade information. Before con-
tinuing, please wait for the date/time display to show up;
5. Using the phone embedded web server or keypad configuration menu, you can
further configure the phone using either a static IP or DHCP.
Headset Port
Handset Port
4