Hama WFC-970 Mode D'emploi page 13

• If you wish to select cities from different countries, you
have to exit the setting with [SET] and re-enter it again as
described above in order to change the country
You may select maximum FIVE cities as favorites. If you
want to add more cities, then
information window.
When all settings are done, press [SET] to confirm and exit
the setting mode.
REMARK:
If, after inserting the batteries the first time, you are skipping
the city selection, the product will select by default "Frankfurt
am Main" as your selected city.
DISPLAY OF FAVOURITES
If you have selected more than one city as favorite, as an
example Frankfurt am Main, Paris and Stockholm, then you
are able to scroll through these cities by pressing when the
Information window shows the CITY NAME (Press SET until it
displays the City name).
REMOVE A CITY FROM THE LIST OF FAVOURITES
• Press and hold [SET] for 3 seconds,
in the information window, then press [
select the country.
• Press [SET] key to confirm the country
• Then press [ ] or [
• Press [TEST ] to remove the
from the favorites
• Repeat this if you wish to remove more cities from your list
• Now you may also press [
favorite city.
Once you have made all your changes, press [SET] to quit.
will be shown in the information window. After 4
seconds, it will go to the City-Date-Time Mode.
PERSONALIZED A PLACE NAME
• Press and hold [SET]) for 3 second. In the information
window,
key to select the country. Let´s said you have selected the
counry Germany which is represented in
• Press [SET] key to confirm the country (let´s said we select
Germany right now), and then the information window will
show .
will show in the
] or [
] to go to your selected city with the
. now this city is removed
] or [ ] to select another
is shown, and then press
• Then press [
name will be shown in the information window such as
you would like to enter a new city which is near the region
of Frankfurt am Main.
• Press the MEM key; a cursor flashes on the first position of
the information window.
The following input commands then apply:
Key
[ ] or [
[SET]
[TEST
** The place that you have selected to enter your own
is shown
description will still exist under its own name.
] to
• Press [SET] key to confirm and exit
SET THE TIME ZONE and LANGUAGE
• Press and hold [SET] for 3 second,
the information window.
• Press [SET] again, the
information window, press [
time zone.
• Press [SET] again, then the language will be shown in the
information window, press [
desired language. There are total seven language for
selection, namely German, English, Spanish, French,
Italiano, Dutch, Swedish.
• Press [SET] again and
information window. After 4 seconds, it will change to the
City-Date-Time Mode.
or
REMARK:
If you do not have any selection into the setup mode up to
.
60 seconds, it will automatically exit the setup mode. The
information window will show City / Date & Alarm.
] or [ ] key to select the city, and the city
means the city "Frankfurt am Main", and
Funtion
Selection of a letter
]
(1) Accept the selected letter and
jumps to the next position. OR
(2) If you have not entered any
letter (in other words, if only
the cursor is flashing at the last
position, confirm the entry with
this key and your place will also
be included in the memory with
immediate effect
One position back in the data entry
]
process
] or [
] or [
will be shown at the
is shown in
is shown in the
] key to adjust the
] key to select your
13