Publicité
Les langues disponibles
Les langues disponibles
CHILD SAFETY
-
Manually enabling/disabling of the child safety function
Press OK/Lock and keep pressing for 3 seconds, then you can enable/disable the child safety
function.
When the child safety function is enabled, the temperature and function cannot be adjusted in
order to avoid any misuse.
If no button is activated within 3 minutes, the child safety function is automatically enabled.
DOOR OPEN ALARM
If the door is open for more than 3 minutes, an audible alarm will be continually emitted. It can be
stopped by pressing any button, but will start again after 3 minutes if the door remains open.
The alarms will continue until the door is closed.
o POWER FAILURE MEMORY
In the event of a power failure, the refrigerator maintains the operating state prior to the power
failure when the power supply is restored.
o POWER-UP TIME
To protect the refrigerator's compressor from damage in the event of a short power failure (less
than 5 minutes), the compressor will not immediately start again after being switched on.
o OVER-HEATING ALARM (only after a power failure)
When the refrigerator is switched on, if it is in Freezer mode and if the temperature of the
compartment is greater than -10℃, the figures of the freezing area start to flash on the display.
The temperature at which the system operates can be displayed by pressing any button, and
normal display is restored when pressing again on any button or after 5 seconds.
o MALFUNCTION ALARM
If E0, E1, E2, EH or EC are shown on the control panel, this means that the refrigerator is
malfunctioning. In this case, please contact the after-sales service for a maintenance inspection.
Publicité
