Publicité
Les langues disponibles
Les langues disponibles
29.
Install the handle on the other side of the door: turn the handle 180° vertically and install it on the
opposite side of the door, as shown in the illustration. Then re-position the covers.
30.
Once the door handle has been fitted, the operation to reverse the door is finished.
Fitting the external door handle
To fit the door handle, refer to point 13 above.
Space required
• Choose a location that is not directly to sunlight.
• Choose a location with enough space so that the freezer doors can open easily.
• Allow for a safety distance on the right-hand side (F), left-hand side (F), back (E) and above the
appliance when installing it. This allows optimising product performance, reduces your power
consumption and therefore limits your electricity bill (see diagram below).
• Make sure that air can freely circulate behind the appliance.
Publicité
