Description Of The Programming Unit - DJO ARTROMOT S4 Mode D'emploi

2.2 Description of the programming unit

2.2.1 Programming unit in normal mode
time of day
current motion
pattern or pro-
tocol, here: PNF
pattern
ON indicator
current
programmed ROM,
here:
motor A:
- Anteversion 50°
- Retroversion 6°
motor B:
- Adduction 35°
- Abduction 124°
motor C:
- Int. rotation –20°
- Ext. rotation 25°
Note!
When tapping on the display during operation, the question "STOP?" will be asked and the
session can be terminated. By tapping "STOP?", you stop the CPM device.
Warning!
m
Patient hazard —
To operate the ARTROMOT®-S4, patients must at least know how to start and stop the
device.
The MENU button on the remote control can be locked to prevent unintentional change
of the settings. For this purpose, please consult the instructions in chapter 5.1 „General
programming instructions for the ARTROMOT®-S4".
patient chip card
:
A
°
° ° °
B
°
° ° °
C
° °
° ° °
START MENU
START button MENU button
64
min
Ante/Retro
°
°
° °
Ad/Abduction
°
°
° °
Rotation
°
° °
STOP
STOP button
therapy timer
set angle of
motor A
set angle of
motor B
set angle of
motor C
current direction
of motion
drop damage
protection case