Maintenance (Fuse Replacement) - DJO ARTROMOT S4 Mode D'emploi

6.2 Maintenance
(fuse replacement)
Check before each use
Visually inspect the device for signs of me-
chanical damage before each use.
If you detect damage or malfunctions that
may impair the safety of the patient or
of the operator, have the device repaired
before using it.
Technical inspections
Due to their design, the bearings and
joints of the ARTROMOT®-S4 do not
require maintenance and all materials are
protected from corrosion, BUT: For safety,
the devices require regular maintenance.
To maintain the functional and operational
safety, check all components for damage
and loose connections at least once a year.
These checks should be performed by per-
sons with adequate training and experience.
Damaged and worn parts must immediately
be replaced with original spare parts by
authorized staff.
Warning!
m
Patient hazard –
Refer repair and maintenance to autho-
rized persons. Persons are authorized
after training by a specialist trained and
commissioned by the manufacturer.
DJO will make all documents required for
servicing, such as circuit diagrams, parts
lists, descriptions or calibration instructions,
available to authorized experts.
In Germany, the inspections can be carried
out by DJO Technical Service within the
framework of a service agreement.
Other than that, the manufacturer
does not require any other regular
maintenance.
Note!
Regarding further technical or other ins-
pections or inspection intervals, observe
applicable local requirements, such as IEC
62353, DGUV3 or similar regulations to be
observed by users of medical equipment
or electric devices.
104