Publicité
Se deve essere sostituito il cavo di alimentazione ricordatevi che deve obbligatoriamente essere
Qualora sia necessario riparare il termoventilatore contattate un centro di assistenza autorizzato.
-
Spegnere il termoventilatore;
2
utilizzato un cavo tipo 2 x 1 mm
H05VV-F HAR.
Se deve essere sostituito il cavo di alimentazione ricordatevi che deve obbligatoriamente essere
-
Rimuovere le cause di surriscaldamento (per es. ostacoli di fronte alla griglia di ingresso e/o
2
utilizzato un cavo tipo 2 x 1 mm
H05VV-F HAR.
uscita dell'aria, anomalo acumulo di sporco ecc);
-
Lasciate raffreddare il prodotto per 15/20 minuti;
-
Accendete nuovamente il termoventilatore e verificatene il corretto funzionamento.
6. Manutenzione
DIRECTIONS FOR USE
Questo termoventilatore non richiede particolare manutenzione;
DIRECTIONS FOR USE
1. For your own safety
DIRECTIONS FOR USE
1. For your own safety
This fan heater is an extra-heating in the house. It must be used according to this concept.
1. For your own safety
Make sure that your supply rating corresponds to what specified on the rating plate i.e. 230 V AC,
50 Hz.
This fan heater is an extra-heating in the house. It must be used according to this concept.
Don't leave your home while the appliance is in function: ensure in this case that the switch is in
Make sure that your supply rating corresponds to what specified on the rating plate i.e. 230 V AC,
This fan heater is an extra-heating in the house. It must be used according to this concept.
OFF (0) position and the thermostat is in minimum position " ".
50 Hz.
Make sure that your supply rating corresponds to what specified on the rating plate i.e. 230 V AC,
During function, place the heater in a safe position :
Don't leave your home while the appliance is in function: ensure in this case that the switch is in
50 Hz.
-
far (1 mt. ) from inflammable objects or furnitures;
OFF (0) position and the thermostat is in minimum position " ".
.
Don't leave your home while the appliance is in function: ensure in this case that the switch is in
-
if wall mounted, not fixed to wooden or synthetic plastic surfaces;
During function, place the heater in a safe position :
OFF (0) position and the thermostat is in minimum position " ".
-
leaving the air outlet space free : 1 mt. of free space in front of the heater and 50 cm. of free
-
far (1 mt. ) from inflammable objects or furnitures;
During function, place the heater in a safe position :
space behind it;
-
if wall mounted, not fixed to wooden or synthetic plastic surfaces;
-
far (1 mt. ) from inflammable objects or furnitures;
-
not located immediately below a socket-outlet.
-
leaving the air outlet space free : 1 mt. of free space in front of the heater and 50 cm. of free
-
if wall mounted, not fixed to wooden or synthetic plastic surfaces;
Do not leave animals or children touch or play with the appliance. Pay attention! The air outlet grille
-
space behind it;
leaving the air outlet space free : 1 mt. of free space in front of the heater and 50 cm. of free
gets hot during operation (more than 80° C i.e. 17 5° F)
-
not located immediately below a socket-outlet.
space behind it;
WARNING: In order to avoid overheating, do not cover the heater. Do not hang anything on
Do not leave animals or children touch or play with the appliance. Pay attention! The air outlet grille
-
not located immediately below a socket-outlet.
the heater and do not cover it while it's working. This is clearly written on the cover of the product
gets hot during operation (more than 80° C i.e. 17 5° F)
Do not leave animals or children touch or play with the appliance. Pay attention! The air outlet grille
or shown by the symbol
gets hot during operation (more than 80° C i.e. 17 5° F)
Take care, that children are not playing with packaging material (e.g. Plastic Bags)
WARNING: In order to avoid overheating, do not cover the heater. Do not hang anything on
the heater and do not cover it while it's working. This is clearly written on the cover of the product
WARNING: In order to avoid overheating, do not cover the heater. Do not hang anything on
the heater and do not cover it while it's working. This is clearly written on the cover of the product
or shown by the symbol
or shown by the symbol
Do not use the heater in rooms with explosive gas or while using inflammable solvents or varnish
or glues.
If the cordset is damaged and you have to change it, do not do the job yourselves! Take the
Do not use the heater in rooms with explosive gas or while using inflammable solvents or varnish
product to an after sales authorised repair centre or to a person with similar skill and knowledge, in
or glues.
Do not use the heater in rooms with explosive gas or while using inflammable solvents or varnish
order to avoid any risk of danger.
If the cordset is damaged and you have to change it, do not do the job yourselves! Take the
or glues.
Do not use this heater close to showers, baths, swimming pools.
product to an after sales authorised repair centre or to a person with similar skill and knowledge, in
If the cordset is damaged and you have to change it, do not do the job yourselves! Take the
The appliance must be positioned so that the plug is always accessible.
order to avoid any risk of danger.
product to an after sales authorised repair centre or to a person with similar skill and knowledge, in
Do not use this heater close to showers, baths, swimming pools.
order to avoid any risk of danger.
2. Safe positioning
The appliance must be positioned so that the plug is always accessible.
Do not use this heater close to showers, baths, swimming pools.
The appliance must be positioned so that the plug is always accessible.
2. Safe positioning
Use the appliance only in upright position.
2. Safe positioning
As the fan heater is in class 2, earth connection is not required.
Use the appliance only in upright position.
3. Cord storage
The appliance must be used only on a flat, stable surface.
Use the appliance only in upright position.
As the fan heater is in class 2, earth connection is not required.
The appliance must be not accessible for persons who are taking a bath or in the shower.
As the fan heater is in class 2, earth connection is not required.
3. Cord storage
Do not place the cable under a carpet.
For product recovery you can store the cordset pressing it into the product.
3. Cord storage
Mind that during function the cordset must be always completely pulled out.
4.1 Use of the heater , version with switch and thermostat
For product recovery you can store the cordset pressing it into the product.
Mind that during function the cordset must be always completely pulled out.
For product recovery you can store the cordset pressing it into the product.
4.1 Use of the heater , version with switch and thermostat
Mind that during function the cordset must be always completely pulled out.
The heater has 2 knobs: one controles the switch and the other the thermostat.
4.1 Use of the heater , version with switch and thermostat
The heater has 2 knobs: one controles the switch and the other the thermostat.
The heater has 2 knobs: one controles the switch and the other the thermostat.
The switch knob has 4 positions, allowing to select the desired
power setting :
O
=
OFF
6
=
COLD AIR
ENGLISH
ENGLISH
ENGLISH
Use the appliance only in upright position.
As the fan heater is in class 2, earth connection is not required.
6.1 Version with switch and thermostat
3. Cord storage
The heater has 2 knobs controlling the switch and the thermostat.
The switch knob has 5 positions, allowing to select the desired power setting.
Starting from the " " position, turn the thermostat knob clockwise until you hear a "click": the
For product recovery you can store the cordset pressing it into the product.
appliance starts working at the desired power setting.
Mind that during function the cordset must be always completely pulled out.
The thermostat maintains the desired room temperature switching on and off automatically the
4.1 Use of the heater , version with switch and thermostat
The switch knob has 4 positions, allowing to select the desired
appliance. The more the knob is turned clockwise, the higher is the maintained temperature.
power setting :
Maximum thermostat setting corresponds at about 30°C; " " position corresponds to approximately
The heater has 2 knobs: one controles the switch and the other the thermostat.
5°C.
ON - OFF
O
=
OFF
For correct use of the thermostat , see section " USE OF THE THERMOSTAT"
1000 W
1800 W
=
COLD AIR
6.2 Model with thermostat and 60' timer
The heater has 2 knobs.
Oscillation:
=
WARM AIR (1000W)
Turn the timer knob clockwise to select the working time you prefer from 5 to 60'. The heater starts
Due to the oscillation (turning) a more equal temperature in the surrounding is achieved.
working at full power (2000W) and thermostat setting doesn't influence the functioning;
=
HOT AIR (2000 W)
Never block the oscillation movement.
After the selected period the heater will automatically turn to mid power (1000W), thermostatically
ON - OFF
controlled according to the thermostat setting. For the use of the thermostat see section 6.3.
Starting from the " " position, turn the thermostat knob clockwise until you hear a "click»: the
When the heater is working under timer control at full power, the thermostat doesn't control the room
1000 W
appliance starts working at the desired power setting.
temperature. In this condition, do not use the heater in small rooms when they are occupied by
The thermostat maintains the desired room temperature switching on and off automatically the
persons not capable of leaving the room on their own, unless constant supervision is provided.
1800 W
appliance. The more the knob is turned clockwise, the higher is the maintained temperature.
Maximum thermostat setting corresponds at about 30°C; " " position corresponds to approximately
6.3 Use of the thermostat
5° C.
In a room where the temperature is too high (more than 30°C), it is normal that the thermostat will not
switch on the heater.
Use of the thermostat
In a room where the temperature is too low (around 5°C or even less) it is also normal that the
thermostat will keep the appliance working until the temperature gets higher.
In a room where the temperature is too high (more than 30° C), it is normal that the thermostat will
To select the right thermostat position we suggest you to
not switch on the heater.
-
turn the thermostat in maximum position (clockwise);
In a room where the temperature is too low (around 5° C or even less) it is also normal that the
thermostat will keep the appliance working until the temperature gets higher.
-
leave the appliance working until the comfortable temperature is reached;
To select the right thermostat position we suggest you to
-
turn the knob anti clockwise until you hear a "click" and the appliance stops;
-
turn the thermostat in maximum position (clockwise);
-
turn clockwise again the knob (just a little): in this position the thermostat will maintain the
-
leave the appliance working until the comfortable temperature is reached;
comfortable temperature you have selected.
-
turn the knob anti clockwise until you hear a "click" and the appliance stops;
-
If the appliance is used for the first time there can be a little smoke due to some production
turn clockwise again the knob (just a little): in this position the thermostat will maintain the
oil residues.
comfortable temperature you have selected.
4.2 Version with thermostat
For your safety the appliance has an tip over switch.
A pendular cuts off the power when it tips over.
The clatter noise is no reclamation reason.
Starting from the " " position, turn the thermostat knob clockwise until you hear a "click»: the
appliance starts working at the desired power setting.
The thermostat maintains the desired room temperature switching on and off automatically the
To clean the filter proceed as following (picture)
appliance. The more the knob is turned clockwise, the higher is the maintained temperature.
- Pull out the power plug;
Maximum thermostat setting corresponds at about 30°C; " " position corresponds to approximately
- Press the filter button at the back of the product and pull it backwards;
5° C.
- Remove the sponge filter from its holder;
For the correct use of the thermostat see section 4.1
- Clean the filter by water with wash power under the temperature of 30°C.
5. Safety in case of abnormal operation
In case of overheating the safety cut out protecting the heating element will automatically switch off
the appliance.
In this case the appliance stops working and the pilot light will remain switched on even if the
appliance is not working.
If this happens:
-
switch off the fan heater;
-
remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air
outlet grille);
-
leave the heater cool down for 15/20 minutes;
-
switch on again the fan heater.
6. Maintenance
This fan heater does not require any particular maintenance.
We only recommend to clean at least twice a year the air inlet and air outlet grille with a vacuum
cleaner to remove dust from motor and heating element.
In case you need to repair it, please contact an authorised repairing center.
If the cordset is to be changed, please mind that a 2x1mm
2
H05VVF HAR cordset is to be used.
7
Publicité
