PCWork PCW02B Mode D'emploi page 11

Power Button
Press the button to turn the device on or off.
Measurement Mode / Measurement Function Selection Button
Press the button to switch between measurement modes. After turning the meter
on, it defaults to the smart measurement mode. Press the function selection button
once to switch to manual measurement mode. Then press the button to select among
measurement function sections. Press the button again and hold it for 2 seconds to
switch back to the smart measuring mode.
Function Selection / Flashlight Button:
If a measurement function section has the option to choose from different functions
(e.g. choose DC or AC when measuring current), press the
between the functions. Hold the button for more than 2 seconds to turn the flashlight
on or off.
Backlight / Data Hold Button:
Press the button to turn on or off the data hold function. If you press the button for
more than 2 seconds, you turn the display backlight on or off.
True RMS
This device measures values in "True RMS".
Auto Range Function
When using the device, the correct range for each measurement function is chosen
automatically by the device.
11
button to switch