Bosch DHU635HZA Notice D'utilisation Et De Montage page 11

WARNING ‒ Risk of fire!
Grease deposits in the grease filter may catch
fire.
▶ The specified safety clearances must be
complied with in order to prevent a build-up
of heat.
▶ Observe the specifications for your cooking
appliances. If the installation instructions for
the cooking appliances specify a different
clearance, the larger of the two must al-
ways be provided for. If gas hobs and elec-
tric hobs are operated together, the largest
specified clearance applies.
▶ The appliance must be installed with no
more than one side directly next to a high-
sided unit or a wall. The distance between
the appliance and wall or high-sided unit
must be at least 50 mm.
Grease deposits in the grease filter may catch
fire.
▶ Never work with naked flames close to the
appliance (e.g. flambéing).
▶ Do not install the appliance near a heat-
producing appliance for solid fuel (e.g.
wood or coal) unless a closed, non-remov-
able cover is available. There must be no
flying sparks.
WARNING ‒ Risk of injury!
Components inside the appliance may have
sharp edges.
▶ Wear protective gloves.
The appliance may fall down if it has not been
properly fastened in place.
▶ All fastening components must be fixed
firmly and securely in place.
Changes to the electrical or mechanical as-
sembly are dangerous and may lead to mal-
functions.
▶ Do not make any changes to the electrical
or mechanical assembly.
WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appli-
ance may damage the connecting cable.
▶ Do not kink or trap the connecting cable.
If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
All manuals and user guides at all-guides.com
▶ If the appliance or the power cord is dam-
▶ "Call Customer Service." → Page 9
▶ Repairs to the appliance should only be
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be
▶ Only use genuine spare parts when repair-
▶ If the power cord of this appliance is dam-
Improper installation is dangerous.
▶ Connect and operate the appliance only in
▶ Connect the appliance to a power supply
▶ The protective conductor system of the do-
▶ Never equip the appliance with an external
▶ When the appliance is installed, the mains
▶ When installing the appliance, check that
11.5 General information
Follow these general instructions during the installation.
¡ For the installation, observe the currently valid build-
¡ When discharging the exhaust air, the official and
¡ The width of the extractor hood must correspond at
¡ To optimally detect the cooking vapours, install the
¡ In order to freely access the appliance for servicing,
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
carried out by trained specialist staff.
carried out by trained specialist staff.
ing the appliance.
aged, it must be replaced by the manufac-
turer, the manufacturer's Customer Service
or a similarly qualified person in order to
prevent any risk.
accordance with the specifications on the
rating plate.
with alternating current only via a properly
installed socket with earthing.
mestic electrical installation must be prop-
erly installed.
switching device, e.g. a timer or remote
control.
plug of the power cord must be freely ac-
cessible. If free access is not possible, an
all-pole isolating switch must be installed in
the permanent electrical installation accord-
ing to the conditions of Overvoltage Cat-
egory III and according to the installation
regulations.
the power cable is not trapped or dam-
aged.
ing regulations and the regulations of the local elec-
tricity and gas suppliers.
legal regulations, such as the regional building
code., must be observed.
least with the width of the hob.
appliance in the middle of the hob.
select an easy-to-reach installation site.
Installation instructions en
11