Side-Discharging The Clippings - Toro 20899 Mode D'emploi

Figure 32
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine, remove it before
side-discharging the clippings; refer to
Bag (page 13).
Important: The machine has a safety switch that
prevents you from starting the machine unless you first
install the mulch plug securely on the machine; refer to
Mulching the Clippings (page
Installing the Side-Discharge Chute
1. Unlock the side-discharge door
Figure 33
2. Lift open the side-discharge door
Figure 34
Removing the Grass
12).
(Figure 33).
(Figure 34).
3. Install the side discharge chute and close the door onto
the chute (Figure
Removing the Side-Discharge Chute
To remove the side-discharge chute, reverse the steps above.
Important: Lock the side-discharge door after you close
it (Figure 36).
14
35).
Figure 35
Figure 36