Oreck ELEVATE Mode D'emploi page 16

Maintenance - Clearing Clogs
WARNING:
BEFORE CLEANING OR SERVICING.
5
If the lower tube is not blocked, look
into the fan housing for blockage. Be
sure to reassemble lower tube and
tighten the lower tube connector
before continuing use.
Lubrication
The motor and brushroll are equipped with bearings which contain sufficient lubrication for their
lifetime. The addition of lubricant could cause damage. Do not add lubricant to motor or brushroll.
The Belt
This vacuum is equipped with the Enduralife
Motor Protections
If the vacuum becomes overloaded (which could occur when a large obstruction is sucked up or
when vacuuming extremely thick carpet), the electronics are designed to shut down the vacuum. If
this happens, the vacuum will automatically shut off. To reset the vacuum, turn the unit to "O" or off,
then turn on to continue use. If it shuts down again there may be a large obstruction in the vacuum.
See Clearing Clogs for the steps on clearing a clog from the air path.
Service
Annual Service Tune-ups will keep your Oreck
for years to come. Oreck
customized maintenance, expert repair and specialized service to ensure the best cleaning
experience at every use.
IF YOU NEED ASSISTANCE
Please call 1-800-406-2005 (Mon-Fri 8am-5pm EST) to speak with a customer
service representative; or visit our website at Oreck.com.
16
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS — REMOVE BATTERY
Belt, which is designed for long life and doesn't need changing.
™
Clean Home Centers and Oreck
®
vacuum operating at optimal performance
®
Authorized Retail Dealers offer
®