Voice-Controlled Send Function (Vox); Channel Scan; Searching For An Active Channel - SilverCrest SPMR 8000 A1 Manuel D'utilisation Et Informations Sur Les Services

Voice-controlled send function (VOX)

This function is similar to the hands-free feature of your mobile phone. The PMR will start transmitting as
soon as it detects your voice (or any other noise). This allows you to send a message without pressing the
PTT button [11]. Using this function is not recommended when you are located in a noisy or windy
environment.

Channel scan

Channel scan will search all available channels (1 to 8) for any active stations in a loop.
If an active channel is found, you can search for the CTCSS or DCS code that a station is using on the
channel.

Searching for an active channel

The scan will stop automatically once an active channel has been found. Then you can listen to the
transmissions. Once the transmission on the active channel is terminated, the channel search continues.
Pressing the PTT button [11] while listening to a found channel, the handheld
transceiver will use that channel and return to idle mode.
 Press the Menu
VOX setting will flash on the display.
 Press the Up  button [9] to enable the VOX function or to raise the VOX
sensitivity.
 Press the Down  button [6] to reduce the VOX sensitivity or to disable the
VOX function ("OF").
 Press the PTT button [11] to confirm the setting.
 Press the Menu
channel number will flash on the display.
 Press the Up  [9] or Down  [6] button to launch the channel search.
button [5] four times. The indication "VOX" and the current
button [5] five times. The indication "SC" and the current
SilverCrest SPMR 8000 A1
English - 83