Gigaset Smart care Manuel D'installation page 20

Remote control button
For alarm scenario Alarm button
¤
Insert the battery
¤
Click the panel into place
Once a sensor is registered successfully, the next screen of the app is shown automat-
ically. You can now fit the sensor.
¤
Attach the remote control button in a central position in the house/flat
Close the configuration using the smart care app.
Gigaset E380A Care alarm phone
¤
Connect the phone (comprising a base station and handset).
¤
Setting up the handset for
use
Detailed information is provided in the operating instructions included.
IP telephony and smart care
¤
Connect the base to a router
¤
Once the E380A Care base station is connected, please follow the instructions in
the smart care app.
18
¤
Press the Pairing button at
the top of the sensor
¤
Press Next in the smart
care app
(Gigaset smart care system plus)
¤
Connecting the base to
the mains power supply
Setting up an IP account
¤
Press the Message key
or
¤
use the web configurator on a PC/tablet
www.gigaset-config.com
¤
Position the adhesive strip
in the middle at the back
Fixed line network teleph-
ony
¤
Connecting the base to
the analogue telephone
network
on the handset
de en
es fr it nl