Gigaset Smart care Manuel D'installation page 18

Installing a universal sensor
For alarm scenarios Leave house/flat, Sleep and Activity
¤
Insert the battery
¤
Fit the panel
¤
Affix the adhesive strip
directly or
¤
Attach the magnet to the
window frame
¤
Fit the sensor to the
closed window
¤
In the app, tap NEXT . . . The base station and sensor are calibrated.
Close the configuration of the alarm scenarios using the smart care app.
16
¤
Press the Pairing button at
the top of the sensor
¤
Press Next in the smart
care app
¤
Affix it to the holder
¤
Attach the magnet to the
door frame
¤
Attach the sensor to the
closed door
Once a sensor is registered
successfully, the next
screen of the smart care
app is shown automati-
cally. You can now fit the
sensor and calibrate it
with the base station. Fol-
low the instructions of the
smart care app.
¤
Attach the holder to the
door, window or fridge
¤
Press the Pairing button
on the sensor
¤
Open the window/door
by about 5 cm
de en
es fr it nl