Gigaset Smart care Manuel D'installation page 17

Configuring the alarm scenarios
Use the alarm scenarios to specify which person or residential-specific situations are
detected for the person living alone, and are reported to the smart care app. The fol-
lowing person-specific alarm scenarios are available:
Activity:
Sleep:
Leave house/
flat:
Alarm button:
In addition to person-related alarm situations, the following residential-specific alarm
situations can be configured:
Smoke alarm:
Water escaping:
If you want to configure more alarm scenarios:
¤
Open the screen menu and select
It shows a list of available alarm scenarios (those already installed are shown blue).
When you set up an alarm scenario, you are shown information on the installation of
sensors required.
You can of course add more motion detectors, universal sensors and alarm buttons to
integrate additional rooms, cabinets, windows and doors into the smart care system,
thereby increasing accuracy.
A sensor can be used by different alarm scenarios.
de en es fr it nl
Detects longer periods of inactivity during the day in the house/
flat and triggers an alarm as required.
All sensors installed are used - at least one motion detector each
in the entrance area and bathroom, and one universal sensor at
the entrance door.
Triggers an alarm when the person does not get up in the morn-
ing at the usual time and records information on sleep behav-
iour.
At least one motion detector each in the entrance area and bath-
room, and one universal sensor at the entrance door.
Detects when the person leaves the property.
Sensors: Universal sensor at the entrance door, motion detector
in the entrance area.
Initiates an alarm notification when the alarm button is pressed.
Sensor: Remote control button
Immediately informs you when smoke builds up.
Sensor: Smoke alarm
Warns you early about water escaping in your flat/house.
Sensor: Water alarm
Alarm scenarios
Step 3
.
15