Koba Vision Vocatex Standard 2014 Mode D'emploi page 28

Reading within the same column

Sliding up or continue reading without sliding the text that is being read out of screen: the reading
frame disappears when the movement is stopped and reappears when the new position is found.

Continue reading while the text is slid out at the top of the screen. The frame disappears and
reappears when the text that is being read enters the screen again. When the text connects, this is
shown by double bars that approach one and other.

When it is impossible to reconnect, meaning that the text was slid through too far, an arrow appears
to the right of the bar. You can position the text back until you see the indicator with the 2 bars.
Reading a next column
During the reading of one column you can already move to the next without interrupting reading of the
previous column. In that case an arrow is shown next to the bar. To repeat a text you can slide the text
downwards. The text will be read from the top.
Language and reading voices
You can change the language options at any time. To open the language menu, you press button 7 for 10
seconds. The language menu will open. The menu has 3 steps:
Step 1: Language of the spoken assisting messages
This is where you adjust the language of the spoken buttons. You choose your mother tongue. An inhabitant of
France chooses French. By turning the big knob you choose the language. By holding button 7 you will go to
step 2.
Step 2: Preferred voice
Most languages have several voices. In step 2 you choose your preferred voice for the spoken buttons and your
preferred voice for reading out the texts. Usually you can choose between a male and female voice. In French,
for example, you can choose between Virginie, Thomas, Felix and Audry. You select the language by turning the
big knob. By holding button 7 you will go to step 3.
Step 3: Other reading voices
If you would like to have texts read out by other voices or in different languages, you can select other voices in
step 3. By turning the knob you select a voice. By briefly pressing button 7 you can switch a voice on or off. (X)
indicates that a voice is switched on. (
voices. By holding button 7 you will exit the voice and language menu.
KOBA Vision Vocatex
) indicates that a voice is switched off. You can switch on/off various
27