Handheld Microphone - LD Systems WS1G8 Manuel D'utilisation

1
2
3
5
6
4
5

HANDHELD MICROPHONE:

1 MICROPHONE HEAD
2
BACkLIT LCD
Displays group, channel and a 4 segment battery
status indicator. If the battery symbol blinks, the
batteries need to be replaced immediately.
NOTE: Backlight will turn off automatically after a
brief moment.
3
ON / Off SwITCH
4 GAIN CONTROL
Handle carefully! Use only suitable screwdriver!
Turn left to decrease gain, turn right to increase
gain.
5
BATTERY COMPARTMENT
To replace batteries, unscrew cover counter-
clockwise, remove batteries, insert 2 new AA size
batterries (direction as shown in the compart-
ment) and screw the cover onto the handheld
microphone clockwise. Make shure that the
cover is screwed tightly in order to maintain safe
operation.
6 IR INfRARED INTERfACE
Located on the bottom side of the handheld
microphone.
For frequency synchronisation push the ASC but-
ton on the receiver (the ASC symbol in the display
blinks) and hold the (switched on) transmitter with
its infrared interface facing direct to the infrared
interface of the receiver in a distance between 5
and 20 cm.
9